distributed by:

WiMo Antennen und Elektronik GmbH

Am Gaxwald 14, 76863 Herxheim, Germany, Tel. 07276 / 96680

Home Products About Us Contact Us Order Mailing-List Prices
  datasheets  

The FC-5000 series developed for wide band FM two-way communication test. The Rx Tester acts as a near-field broadband receiver and can lock automatically and almost instantly on to any FM signal within its frequency range. FM signals are demodulated and output it through its built-in speaker or audio earphone supplied.

The high sensitivity to nearfield signals makes the Rx Tester ideal as a bug-finder for security, counter-surveillance and radio communication testing applications.
FC-5002 incorporates an ICOM CI-V interface for tuning with the FC-3002 frequency counter.


FC-5001


FC-5002

  • VHF to UHF frequency coverage
  • FM demodulation
  • Deviation : less than 100KHz
  • High sensitivity : -53dBm @500MHz
  • Autoholding with a LOCK Indicator and a SKIP button *
  • Low battery indicator *
  • 5 section RSSI bargraph to indicate received signal strength *
  • Incorporating an ICOM CI-V interface for tuning with the FC3000 series *
  • Internal 5 x AA 600mAH rechargeable battery pack
  • Hardwearing aluminum case with black anodized finish
  • Compact dimension : 100 x 68 x 31 mm
  • Weight : 280g
  • Supplied with AC wall charger, UHF/VHF rubber antenna and earphone
    Note : * on FC5002

FC-5001 users manual
Users Manual
FC-5001

Introduction

The Aceco FC5001 is a two-way FM radio tester that has the ability to lock automatically and almost instantly on to any FM signal within its frequency range. FM signals are demodulated and output it through its internal speaker or external earphone. The high sensitivity to nearfild signals makes it ideal for RF security, counter-surveillance and radio communication testing applications. Supplied as a complete with internal NiCd pack, AC wall charger, VHF/UHF flexible antenna and audio earphone.

Specifications

Frequency range:

30 MHz - 900 MHz (Cellular Blocked)

Modulation:

FM

Deviation:

< 100 KHz

Sensitivity:

< -53 dBm at 500 MHz

Weight:

280 g

Size:

100 mm high x 68 mm wide x 31 mm deep

Impedance:

50 Ohms (BNC Socket)

Case:

Stamped aluminum with black anodized finish

Battery:

Internal 5 x AA 600 mAH NiCd pack

Power:

9 VDC 300 mA

Features

  • Pocket size
  • Built-in speaker
  • Equipped with a 2.5 mm earphone mini jack
  • Squelch indicator to display signal reception
  • Low power consumption (Average 5 hour battery life)
  • Supplied with NiCd pack, AC wall charger, flexible antenna and earphone

Controls

VOL Knob - This knob turns the tester on and adjusts sound volume.
SQL Knob - This tunes the squelch up or down to set the signal strength for reception.
SKIP Button - This frees the tester from any unwanted signals.

Battery

This tester can operate for up to five hours from its fully charged NiCd batteries. They are charged when the unit is plugged into the supplied AC/DC adapter. Full recharge will occur over 12 to 16 hours. Before recharging the batteries you should be deep cycled occasionally by allowing them to completely discharge to maintain maximum battery capacity. The NiCd batteries should last for several years. However, it is a good idea to check them every twelve months for signs of corrosion or leakage. Always replace the whole set if any one cell fails.

Warranty

Warranty does not cover damage caused by excessive power levels 15 dBm applied to the signal input.

CAUTION

Never make any kind of connection between the unit and a transmitter .

 

FC-5002 users manual
Users Manual
FC-5002

Introduction

The Aceco FC5002 is the latest advance in nearfield FM tester with Received Signal Strength Indication. Capable of locking automatically and almost instantly onto any FM signal within VHF to UHF range. Once locked it will demodulate the FM signal and permit it to be monitored through build-in speaker or earphone. Its RSSI feature (relative signal strength indicator) is useful in locating stuck transmitters or listening devices. There is also a feature for holding a locked channel. It can incorporate an ICOM CI-V interface for tuning with the FC3000 series. The great sensitivity to nearfild signals makes it ideal for RF security, counter-surveillance and radio communication testing applications. It comes complete with internal NiCd pack, AC wall charger, VHF/UHF flexible antenna and audio earphone.

Specifications

Frequency range:

30 MHz - 900 MHz (Cellular Blocked)

Modulation:

FM

Deviation:

< 100 KHz

Sensitivity:

< -53 dBm at 500 MHz

Weight:

280 g

Size:

100 mm high x 68 mm wide x 31 mm deep

Impedance:

50 Ohms (BNC Socket)

Case:

Stamped aluminum with black anodized finish

Battery:

Internal 5 x AA 600 mAH NiCd pack

Power:

9 VDC 300 mA

Features

  • Pocket size
  • Built-in speaker
  • Equipped with a 2.5 mm earphone and a 3.5 mm CI-V mini jack
  • 5 section RSSI bargraph to show relative RF signal strength
  • Incorporating an ICOM CI-V interface for tuning with the FC3000 series
  • Enabling to hold on an active channel
  • Low battery indicator
  • Lock indicator to display signal reception
  • Low power consumption (Average 5 hour battery life)
  • Supplied with NiCd pack, AC wall charger, flexible antenna and earphone

Controls

VOL Knob - This knob turns the tester on and adjusts sound volume.
SQL Knob - This tunes the squelch up or down to set the signal strength for reception.
SKIP Button - This frees the tester from any unwanted signals.
AUTO HOLD Switch - This automatically stops and holds on an active frequency.

Battery

This tester can operate for up to five hours from its fully charged NiCd batteries. They are charged when the unit is plugged into the supplied AC/DC adapter. Full recharge will occur over 12 to 16 hours. Before recharging the batteries you should be deep cycled occasionally by allowing them to completely discharge to maintain maximum battery capacity. The NiCd batteries should last for several years. However, it is a good idea to check them every twelve months for signs of corrosion or leakage. Always replace the whole set if any one cell fails.

Warranty

Warranty does not cover items that have been modified, subject to unauthorized repairs, misuse or abuse. This warranty does not cover damage caused by excessive power levels 15 dBm applied to the signal input.

CAUTION

Never make any kind of connection between the unit and a transmitter.

Home Products About Us Contact Us Order Mailing-List Prices
distributed by:

WiMo Antennen und Elektronik GmbH

Am Gaxwald 14, 76863 Herxheim, Germany, Tel. 07276 / 96680